RE: [CR]SR Brake lever blade black washer simple questions and correction

(Example: Humor)

From: "Mark Cutrufelli" <rena.cutrufelli@comcast.net>
To: <Classicrendezvous@bikelist.org>
References: <s7d15de8.007@gw15.hofstra.edu> <8CA4EAEA34199A7-11DC-1180@webmail-md20.sysops.aol.com> <8CA4EB37231FFE7-11DC-1450@webmail-md20.sysops.aol.com> <d51ac5a60803081300k7a7dc053j6534129cf288eba6@mail.gmail.com> <76FD7C4C-3924-49F0-8840-98F265270AB8@optonline.net> <d51ac5a60803081327x347bbb94m65867a80c8e27fb8@mail.gmail.com> <000701c881a1$953ab6f0$0d0a0a0a@PC175064711631>
Subject: RE: [CR]SR Brake lever blade black washer simple questions and correction
Date: Sun, 9 Mar 2008 13:58:47 -0400
Thread-Index: AciBY1BbIqgeB+cMRYa7d3jZnp8QwwAPG5WwABvMWyA=
In-Reply-To: <000701c881a1$953ab6f0$0d0a0a0a@PC175064711631>


Correction I think they are properly called SR brake lever blade "bushings" (not washers) as I called them in post below

Mark Cutrufelli Laurel,Maryland USA

-----Original Message----- From: classicrendezvous-bounces@bikelist.org [mailto:classicrendezvous-bounces@bikelist.org] On Behalf Of Mark Cutrufelli Sent: Saturday, March 08, 2008 11:54 PM To: Classicrendezvous@bikelist.org Subject: [CR]SR Brake lever blade black washer simple questions

After buying new SR Brake lever blades (thanks Steve Maasland) -Do those Campy SR black washers (the ones shaped like a hat) go inside or outside the pivot hole in the lever blade? I put them outside- thought I remembered right but... While the right one fit in after some doing and forcing, I bent one of the two black washers for the left lever blade. Then it ocuured to me that maybe I remembered and maybe they should be inside the hole on the blade, which would make it easier to insert the lever blade. Now I gotta find another washer.

Are these the same washers as NR if I happen to find someone with those?

Also should those washers be lubed where they go in the hole of the brake lever blade pivot hole?

Mark Cutrufelli
Laurel,Maryland
USA