[CR]Looking for very thin walled 7mm socket

(Example: Framebuilders:Alex Singer)

To: classicrendezvous@bikelist.org
From: "Leonard Bulger" <lbulger@comcast.net>
Date: Mon, 10 Mar 2008 22:51:55 -0400
Subject: [CR]Looking for very thin walled 7mm socket

Hi everyone,

I'm looking for a socket or a wrench that will fit the locknut on an old Simplex retrofriction bar-end lever. It's a 7mm nut, but there is very little room around it and the socket needs a very thin wall. Thanks.

Leonard Bulger
Marblehead, MA USA