Re: [CR]Campy track hubs w/ quick release

(Example: Framebuilders:Cecil Behringer)

Date: Wed, 26 Mar 2008 09:19:31 -0400
From: "Via Bicycle" <viabicycle@gmail.com>
To: pbbikes <pbbikes@gmail.com>
Subject: Re: [CR]Campy track hubs w/ quick release
In-Reply-To: <3eb5ff10803260553h46287020m53279b0b89d6afe0@mail.gmail.com>
References: <3eb5ff10803260553h46287020m53279b0b89d6afe0@mail.gmail.com>
cc: classicrendezvous@bikelist.org

Barry, yes that could have been original. Schwinns used some on their Paramounts, my 1961 had them and was original with bill of sale. wasn't until late 60's early 70s that they were banned on the track. ralph\ philadelphia, PA

On Wed, Mar 26, 2008 at 8:53 AM, pbbikes <pbbikes@gmail.com> wrote:
> Hey all.
>
> I have a rear Campagnolo track hub that came with a quick release axle. Im
> not sure if this was the original setup.
>
> The hub shell is a 60's "no record" model and the locknuts date"62" .
>
> Are there any signs to say whether or not this was the original setup-as in
> the rare
> curved release hubs or just a mod done by someone else .
>
> Also when I pulled it apart to clean it I tried the cones on a rear track
> axle and they dont fit properly.
>
> What were the different threadings/diameters of the axles
>
> Thanks for all of your wonderful knowledge and time
>
> Barry Scott
> Brooklyn, NY USA
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
> text/plain (text body -- kept)
> text/html
> ---
> _______________________________________________
> Classicrendezvous mailing list
> Classicrendezvous@bikelist.org
> http://www.bikelist.org/mailman/listinfo/classicrendezvous