[CR]giveaway: 39-tooth "three arrows" 3-pin chainring--Takagi steel

(Example: Framebuilding:Norris Lockley)

From: <"tom.ward@juno.com">
Date: Thu, 3 Apr 2008 01:08:36 GMT
To: classicrendezvous@bikelist.org
Subject: [CR]giveaway: 39-tooth "three arrows" 3-pin chainring--Takagi steel

If anyone out there is running a steel three-pin Takagi "Three Arrows" c hainset, I will mail you, free of charge, an unused 39-tooth chainring. It won't do anyone else any good, as it is not quite the usual 3-pin BCD ; Takagi "Three Arrows" cranksets set their own specs, although without my Sutherland's handy, I can't tell you what that spec is exactly. I bel ieve the bolt-circle-diameter is 2mm smaller than the usual. This deep funk, but it could get you climbing hills better with that fun ky ride. What's more, it's free and fun. Only catch is you must describe said vehicle to the list (unless you are really shy). Who--that is, wha t brands--used "Three Arrows"? If one of you has a bike so equipped, I'm suspecting it's something made in Japan but with an anglophilic or cont inental-sounding name; perhaps Kent or Savoy. Tom Ward

Brooklyn, New York, USA