Re: [CR]Sturmey indicator rod ID; help!

(Example: Framebuilders:Pino Morroni)

Date: Tue, 08 Apr 2008 07:54:19 -0500
To: W PAUL PATZKOWSKY <oldtrikerider@q.com>, <classicrendezvous@bikelist.org>
From: "Mark Stonich" <mark@bikesmithdesign.com>
Subject: Re: [CR]Sturmey indicator rod ID; help!
In-Reply-To: <BLU123-W88CA7A6B9485D3214EF89AAF20@phx.gbl>
References:


At 4/8/2008 11:06 AM +0000, W PAUL PATZKOWSKY wrote:
> I've been clearing out my Sturmey Archer stuff and found an odd indicato
>r rod. The thicker, longer female end (with the slot for a screwdriver) is
> about 3 and 21/32" in length. The over all length of the entire rod screw
>ed together is 5 3/4" to the point where the chain attaches. The shorter p
>iece has a small threaded collar that goes on it. The best ID that I can m
>ake is that the assembly is for an AC hub. It appears to match the picture
> in the catalog parts list but I'm hoping that someone can confirm this ide
>ntification or correct me. Thanks in advance for any help.
>
>Paul Patzkowsky
>Longmont, Colorado

Paul, AC sounds likely. But if you want to make sure, scroll to the bottom of http://www.hadland.me.uk/2tables.pdf You will see the dimensions for the AC/AM rods and those for the similar SW/SB/SG rods.

Mark Stonich;
     BikeSmith Design & Fabrication
       5349 Elliot Ave S. Minneapolis, Minnesota 55417 USA
            Ph. (612) 824-2372 http://bikesmithdesign.com
                        http://mnhpva.org