Re: [CR]regina freewheel question

(Example: Humor:John Pergolizzi)

Date: Sat, 26 Apr 2008 16:45:56 -0800
From: <mrrabbit@mrrabbit.net>
To: Jay S <jvs@sonic.net>
Subject: Re: [CR]regina freewheel question
References: <MONKEYFOODYZY1ezDau00000e83@monkeyfood.nt.phred.org> <481363A6.7040204@sonic.net>
In-Reply-To: <481363A6.7040204@sonic.net>
cc: classicrendezvous@bikelist.org

Are you sure the notches are actually the removal point...take a very close look...you might see a hidden spline within the smaller diameter.

Many times, even with 5 speed Regina's I've started to use a notched tool...scratch my head at the result...take a closer look only to realize why I

have a Phil Wood Regina tool to begin with...

Double check...

=8-)

Robert Shackelford San Jose, CA

Quoting Jay S <jvs@sonic.net>:
> Hello group,
>
> Here is my dilemma. I've managed to get the first three cogs off a five
> speed Regina Oro freewheel, but not the last two. Are the last two
> cogs reverse threaded? Couldn't find the info I need in the archives;
> maybe I searched wrong, but I don't have unlimited time to sit at the
> computer.
>
> The real problem is that despite all my careful efforts, the notches in
> the freewheel body peeled away like butter while attempting the remove
> it from a Campy hub. I thought that removing the cogs would allow me
> better access to the freewheel body, thus giving me another option for
> removal. I'm open to any tips or suggestions as to how to get the
> damm thing off. First time ever I have not been able to remove a
> freewheel. argghhh!
>
> Thanks for any help.
>
>
>
> Jay Sexton
> Sebastopol, CA
> _______________________________________________
>
>
> --
> PRIVACY WARNING: For auditing purposes, a copy of this message has been
> saved in a permanent database.
>

--
PRIVACY WARNING: For auditing purposes, a copy of this message has been
saved in a permanent database.