[CR]FS: Miche 36h 6 speed hubset

(Example: Racing:Jacques Boyer)

From: "Nathan Cozzolino" <cozzolino77@hotmail.com>
To: <classicrendezvous@bikelist.org>
Date: Sun, 4 May 2008 21:06:34 +0000
Subject: [CR]FS: Miche 36h 6 speed hubset

the following info is from a craigslist listing I came upon. I just happen ed to be listing my hubs the same day as someone else listing theirs on my local craigslist...

Miche Competition Italian QR hubset from 1983. Never been used. Rear was bu ilt once but never used. Front is NOS. Box included. Made in Italy by Miche lin (not related to tire company).

Each hub has 36 holes. Rear hub has an over locknut width of 126 mm and is threaded (not splined) for freewheel mounting. Accepts 5 or 6 speed freewheels of either English BSC or Italian threading (same as English except 5 degree difference in thread pitch) such as Atom, Cyclo, Everest, Maillard, Milremo, Regina, Shimano, Schwinn approved, SunTour, Zeus, etc. Will also accept SunTour Ultra 7. Or, you could even use it with a single speed freewheel.

These Campy clones have the same style oil clip on the center barrel as the legendary Campagnolo Record hubs, and a very similar shape as well. NOTE: All parts on the hubs are DIRECTLY INTERCHANGEABLE with Campy Record or Super Record. If you need a replacement axle, keyed lock washers, oil clip, drive-side axle spacer, or other Campy parts, these hubs would make excellent 'donors.'

The finish on Miche hub shell is arguably superior to Campagnolo hubs of the same era. All cosmetic elements are Like New. Very sharp

$50 shipped

Nathan Cozzolino
San Francisco, California