Re: [CR]Size for PARK tools 9/16 Pedal Taps Handle?

(Example: Production Builders:Frejus)

Date: Mon, 12 May 2008 21:18:58 -0500
To: Mr Donald W Gillies <donald_gillies@yahoo.com>, classicrendezvous@bikelist.org
From: "Mark Stonich" <mark@bikesmithdesign.com>
Subject: Re: [CR]Size for PARK tools 9/16 Pedal Taps Handle?
In-Reply-To: <361355.74536.qm@web35507.mail.mud.yahoo.com>
References: <361355.74536.qm@web35507.mail.mud.yahoo.com>


At 5/12/2008 11:21 AM -0700, Mr Donald W Gillies wrote:
>I was hoping to buy some PARK 9/16 pedal taps. What
>is the size of the square shaft on these, i.e. what
>sized tap handle can be used with these taps ?? It
>appears to be 1/2", but if it's a hair larger or
>smaller, I need to get one of 2 choices (<= 1/2", >=
>1/2") to use these taps.
>
>I cannot find the answer, even on the PARK tools
>Website.

I measured one set at 0.317" and an older set at 0.325"

Mark Stonich;
     BikeSmith Design & Fabrication
       5349 Elliot Ave S. Minneapolis, Minnesota 55417 USA
            Ph. (612) 824-2372 http://bikesmithdesign.com
                        http://mnhpva.org