Re: [CR]Cirque Bike Assembly Headaches

(Example: Framebuilders:Cecil Behringer)

Date: Tue, 13 May 2008 06:17:31 -0700 (PDT)
From: "Thomas Adams" <thomasthomasa@yahoo.com>
Subject: Re: [CR]Cirque Bike Assembly Headaches
To: classicrendezvous@bikelist.org
In-Reply-To: <c76dc510805121835i3aa37fd9n4b7e5ac38044fa3e@mail.gmail.com>


Dear list:

Thanks for all the helpful tips, the problem is now solved. The rear brake bridge hole opened up enough with a few strokes of a round bastard file to let the brake bolt in. I think all I did was remove some excess paint. The front, being a chromed crown, didn't get the file. Dissasembling the brake and chucking the bolt in a hand drill let me sand the shaft for a minute with 150 grit paper, after which the bolt passed through easily. No muss, no fuss and now on the the next problem! Anyone know a source for THIN shallow curved brake washers? :-) I managed to cannibalize a set of Mafac centerpulls to keep moving with the current build, but the arched brake washers are definitely getting rare.

Tom Adams, happily assemblying in Manhattan Kansas, USA

On Mon, May 12, 2008 at 10:25 AM, Thomas Adams <thomasthomasa@yahoo.com> wrote: Dear List:

As we enter the home stretch, scrambling to get bikes put together and test ridden before Cirque, I've hit a problem.

The brakes I want to use arent compatible with the frame.

What, you say, did he use short reach on a long reach frame? No, no no!

Recessed mounts on a nutted frame? No, no no!

Calipers hitting odd sized/shaped chainstays? No no no!

The center bolts are too fat for the brake bridge/fork holes. Arrgh!

Brakes are Shimano 600's. Frame would have been built for Campy brakes. The threaded part of the brake center bolt goes through, but the unthreaded part sticks tight. It appears that Campy brake centerbolts were more svelte than other brands.

Any suggestions? Do I drill out the frame openings? The fork crown is chromed, so I'm reluctant to do anything that might cause flaking, chipping or burning. Is it better to sand down the barrels? How long with that take?

And is this a common problem? I'm surprised I haven't seen this before, although as I think about it, I did see it on a rear brake (a Weinmann Carrera) on a frame designed for Campy. Any suggestions appreciated. Oh, I;ve got other brakes to use, but now it's a matter of principle (You WILL accept the brakes I want!)

Tom Adams, rapidly graying in Manhattan Kansas, USA

--------------------------------- Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.

_______________________________________________

--
Sadiq Gill
Richmond, Virginia
US&A
Latitude: 37.58
Longitude: -77.51472