[CR]FS: Campy Record high flange 36H front hub and spokes

Example: Framebuilders:Jack Taylor

Date: Wed, 31 Dec 2008 14:35:36 -0700
From: Doug Van Cleve <dvancleve@gmail.com>
To: CR List <classicrendezvous@bikelist.org>
Subject: [CR]FS: Campy Record high flange 36H front hub and spokes

Howdy folks.

I took apart a front wheel earlier this year and this hub has just been laying around since then. It is used but plenty good and includes an okay but not too pretty straight skewer (correct for the hub, I believe). It was laced 2x to a Torelli Master box section rim, and I suspect somebody thrifty could reuse the spokes. I carefully unlaced the rim and the spokes are still in their original orientation. That rim has an ERD of 611mm and spocalc spits out 283.7mm as the spoke length (not sure if I ended up with 283 or 284mm spokes). Anyway, I would like $30 shipped for this. To pack, I will remove the spokes and group them as elbows in and elbows out so they can be relaced in the same orientation.

Thanks and happy New Year,