Oops,
Doug Van Cleve Chandler, AZ USA
On Wed, Dec 31, 2008 at 2:35 PM, Doug Van Cleve <dvancleve@gmail.com> wrote:
> Howdy folks.
>
> I took apart a front wheel earlier this year and this hub has just been
> laying around since then. It is used but plenty good and includes an okay
> but not too pretty straight skewer (correct for the hub, I believe). It was
> laced 2x to a Torelli Master box section rim, and I suspect somebody thrifty
> could reuse the spokes. I carefully unlaced the rim and the spokes are
> still in their original orientation. That rim has an ERD of 611mm and
> spocalc spits out 283.7mm as the spoke length (not sure if I ended up with
> 283 or 284mm spokes). Anyway, I would like $30 shipped for this. To pack,
> I will remove the spokes and group them as elbows in and elbows out so they
> can be relaced in the same orientation.
>
> Thanks and happy New Year,
> Doug