[CR]Re:Rubber Bar cover

(Example: Framebuilders:Doug Fattic)

From: "Dickey" <ogreer@bellsouth.net>
To: <jerrymoos@sbcglobal.net>, <classicrendezvous@bikelist.org>
Date: Thu, 1 Jan 2009 17:21:26 -0600
Subject: [CR]Re:Rubber Bar cover

Hey Jerry, Why not try a long skinny Phillips screw driver slid under the sheath after you warm it up a little with a hair dryer. Spray some wd40 inside and try rotating the sheath around to let the lube run everywhere inside. This works on motorcycle grips, but, they are not
near as long.
Dickey Greer
West Monroe,La