Re: [CR]Tying and soldering.

(Example: Production Builders:Pogliaghi)

From: "ehbusch" <ehbusch@bellsouth.net>
To: Mark Fulton <markfulton5@mac.com>, D&M Rapley <bunyips2@bigpond.net.au>
References: <4BE43455079A46E4B850708DD79102DF@MRapley> <3E2DC022-8E21-4F8E-B54A-9E4D052B1782@mac.com>
Subject: Re: [CR]Tying and soldering.
Date: Mon, 5 Jan 2009 09:59:13 -0500
reply-type=response
cc: classicrendezvous@bikelist.org

I also agree with the "Diving Off the Banking Feeling" beeing the best and which took on a whole new meaning when they used to hold races at Trenton Speedway. Any one remember that? or been there, done that? Trenton Speedway was used to hold Indy Car Races. As I remember it had the same degree banking as T-Town but it was about three times as wide. When you went to the top of the banking there you were about four stories high..Not too many tied and soldered road wheels there...

Ed Busch
Vonore, Tennessee-USA


----- Original Message -----
From: Mark Fulton
To: D&M Rapley
Cc: classicrendezvous@bikelist.org
Sent: Saturday, January 03, 2009 6:35 PM
Subject: Re: [CR]Tying and soldering.



>I agree with David (Rapley) when he says, "...diving off the banking is
>the best bike feeling ever" with tied & soldered spokes. (G'day David.)
>But that's not why I tied & soldered my spokes when I was velodrome racing
>in the late '40s and early '50s. I tied & soldered mine because all of the
>pros had theirs done, and I was really good at it. My soldering always
>looked really good because I used solid bar tinned lead solder and resin
>flux\u2014not acid core wire solder.
>
> Mark Fulton
> Redwood City

> California

> USA