Re: [CR] OK, here's a MYSTERY HUB!

(Example: History:Norris Lockley)

Date: Thu, 26 Mar 2009 08:51:11 -0400
From: "G L Romeu" <romeug@comcast.net>
To: Drew Ellison <drew@masirider.com>
References: <7d49b7530903240514n438c3409i225b6edb18177149@mail.gmail.com> <8CB7BDB870B927B-B14-2D4E@webmail-md02.sysops.aol.com> <EAB51267-BD54-4533-8F0C-EF830142DF06@masirider.com>
In-Reply-To:
Cc: Dale Brown <oroboyz@aol.com>, classicrendezvous@bikelist.org
Subject: Re: [CR] OK, here's a MYSTERY HUB!


I think that Drew may have it, though it looks like they also turned a shoulder on the short side to get enough material to clear the holes from the turning off of the flange as it would have been too small of an area. It seems to have been slightly offset in the indexer, as the hole drilling was pretty imprecise and not concentric.

a fairly easy job with a mill and a lathe.

Drew Ellison wrote:
> someone chopped off the large flange, polished the edge, drilled some
> holes, and voila! A hi-lo hub.
> Drew Ellison
> Everett, Washington USA
>
> On Mar 25, 2009, at 8:38 PM, Dale Brown wrote:
>
>>
>> Anyone seen this one before?
>>
>> http://www.classicrendezvous.com/images/mysteryhub/index.html
>>
>> - Hi lo design (not a lot of those)
>>
>> - low flange side is an odd really small flange.
>>
>> - sealed bearings but it looks oldish, like in or close to in our time
>> line.
>>
>> - Has a Euro-look to me.....

gabriel l romeu chesterfield new jersey usa

G L Romeu
ø http://studiofurniture.com
ø http://lessplusmore.com
ø http://journalphoto.org