Re: [CR] Wide Cinelli Bars


Example: Framebuilders:Brian Baylis

From: "Koepke, Mark" <mkoepke@uwsp.edu>
To: "classicrendezvous@bikelist.org" <classicrendezvous@bikelist.org>
Date: Fri, 24 Jul 2009 14:07:12 -0500
Thread-Topic: Wide Cinelli Bars
Thread-Index: AcoMkQMRwguXj0CbToWbyoBhQTCgSwAAKZ4A
References: <mailman.9.1248462001.97589.classicrendezvous@bikelist.org>
In-Reply-To:
Accept-Language: en-US
acceptlanguage: en-US
Subject: Re: [CR] Wide Cinelli Bars


Marc: Unless one was willing to bend them out a bit, I believe that such animals NEVER really did exist. The wider bars came later. I raced a lot in the 70s and we bigger guys always had to widen the TTTs or Cinelli's on our own as they couldn't be had at any of our local shops. Mark Koepke, Stevens Point, WI

------------------------------ Message: 2 Subject: [CR] Cinelli handelbars 26.4 diam. old logo 46 or 44 mm center to center To: "classicrendezvous@bikelist.org" <classicrendezvous@bikelist.org>

Dear CR Listers,

Please let me know if any of you have such an orphan or where I might find one. Condition is important.

Thanks for your time,

Marc Winnikoff
Santa Barbara, CA