Re: [CR] WTB: Sachs 7-speed Freewheel cogs 17T, 20T, 24T

(Example: Component Manufacturers:Cinelli)

Date: Tue, 11 Aug 2009 21:37:20 -0400
From: "Harvey Sachs" <hmsachs@verizon.net>
To: <chris@eorbit.net>, Classic Rendezvous <classicrendezvous@bikelist.org>
Subject: Re: [CR] WTB: Sachs 7-speed Freewheel cogs 17T, 20T, 24T


Chris, a few years ago I might have made the same request, since the middle cogs on my Sachs FW on my commuting bike wore horribly. Now, as a Sachs myself (no relation), I keep one bike in full Sachs kit, but for the bikes I ride lots, I gave up and went to a FW from the Land of the Rising Sun - which gave much better wear, I think.

Of course, your mileage may vary. Good luck with the search for long-wearing Sachs FW cogs (but I do love the chains).

harvey sachs mcLean va +++++++++++++++++ Chris Collins wrote: I have gearing I really like on my Sachs 7-speed. The middle cog is worn, and I suspect the other two on either side of it are next. So:

Wanted To Buy three Sachs cogs, 17T, 20T, 24T.

Sachs ARIS 4th/5th positions 20T and 24T. These are called RY-20 and RY-24.

Sachs ARIS 3rd position 17T, this is called an FY-17.

Let me know if you have one new or good used.