Re: [CR] Stronglight 105 Inner + 93 Outer on 93 Crank

(Example: Component Manufacturers:Avocet)

Date: Wed, 23 Sep 2009 07:26:21 -0700
From: Jerome & Elizabeth Moos <jerrymoos@sbcglobal.net>
To: <classicrendezvous@bikelist.org>, donald gillies <gillies@ece.ubc.ca>
In-Reply-To: <20090923034805.997C2435C7@ssh-linux1.ece.ubc.ca>
Subject: Re: [CR] Stronglight 105 Inner + 93 Outer on 93 Crank


Are you sure about the chain? I've NEVER had any problem running any Stronglight crank with PC-48/58/68 chains. These, I think, are/were sold a 6-7-8 speed chains, and are direct decendants of the SedisSport. I almost always use these chains with French bikes or Stronglight cranks, unless I have an older Sedis available. I don't know about modern 9-10 speed chains or narrow Japanese chains with Stronglight cranks.

Regards,

Jerry Moos
Big Spring, Texas, USA


--- On Tue, 9/22/09, donald gillies wrote:


> From: donald gillies <gillies@ece.ubc.ca>

\r?\n> Subject: Re: [CR] Stronglight 105 Inner + 93 Outer on 93 Crank

\r?\n> To: classicrendezvous@bikelist.org

\r?\n> Date: Tuesday, September 22, 2009, 10:48 PM

\r?\n> I agree about the Stronglight 57, 63,

\r?\n> 93, and 105 problems.  I have

\r?\n> a triple and the chain will jam between ANY TWO of the

\r?\n> three rings.

\r?\n> Every time I shift, I have to pedal artificially slowly so

\r?\n> as not to

\r?\n> load the chain, as it skirts between the rings.  If I

\r?\n> shift under

\r?\n> pressure, the chain jams so deeply it's almost impossible

\r?\n> to get it

\r?\n> out of the crankset.  I think the bike is running an

\r?\n> SRAM PC-58 chain.

\r?\n> I've been reluctant to molest (lightly sand) the crank arm

\r?\n> tabs.

\r?\n>

\r?\n> It would be good to know who makes the widest modern 3/32

\r?\n> chain??

\r?\n>

\r?\n> - Don Gillies

\r?\n> San Diego, CA, USA