Re: [CR] Enlarging a 25.4 handlebar stem to 26.0

(Example: Events:Eroica)

In-Reply-To: <75026.3031.qm@web34201.mail.mud.yahoo.com>
References: <4ABE6BF2.9020508@verizon.net>
Date: Sun, 27 Sep 2009 11:28:27 -0400
From: "Ken Freeman" <kenfreeman096@gmail.com>
To: Fred Rednor <fred_rednor@yahoo.com>
Cc: classicrendezvous@bikelist.org
Subject: Re: [CR] Enlarging a 25.4 handlebar stem to 26.0


Yes, I definitely agree! There are several ways one can weaken a stem.

On Sun, Sep 27, 2009 at 10:51 AM, Fred Rednor <fred_rednor@yahoo.com> wrote:
> > HD: Like wise is it safe to and a stem from 22.2 to French
> > 22.0
> > HS: I was encouraged in this form of antiauthoritarian
> > heresy by list members. It works. But light sanding around
> > the stem is less likely to dull the upper part than sanding
> > along the axis of the stem.
>
> Before sanding the stem, remove the top nut from the headset and see if the
> stem will go into the head-tube without modification. I have, on occasion,
> worked on bikes with French threaded steering tubes which were reamed to
> 22.2mm by the manufacturer.
>
> In those cases, I believed it better to slightly enlarge the inside
> diameter of the headset's lock nut.
>
> Bon chance
> Fred Rednor - Arlington, Virginia (USA)
>
>
>
>
> _______________________________________________
>

--
Ken Freeman
Ann Arbor, MI USA