[CR] WTB HI-E axle

(Example: Racing:Wayne Stetina)

Date: Thu, 12 Nov 2009 08:48:59 -0600
To: George Allen <jgallen@lexairinc.com>, <classicrendezvous@bikelist.org>
From: "Mark Stonich" <mark@bikesmithdesign.com>
In-Reply-To: <4AFC133C.2010106@lexairinc.com>
References: <20155367.1257990691767.JavaMail.root@wamui-cynical.atl.sa.earthlink.net>
Subject: [CR] WTB HI-E axle


At 11/12/2009 08:53 AM -0500, George Allen wrote:
>I have a Pino bottom bracket, QR skewers and seat post (I think) on
>a Behringer I purchased a few months ago. I can get some pics up if
>you're interested.

George, Please do.
> I also need a 126 mm Hi-E axle for the rear hub as the bike came
> without one.

Hi-E axles didn't come in a 126. The axles were all the same length and made from 1/2" tubing. Various length end caps were used to get different lengths.

http://bikesmithdesign.com/temp/hi-e_axle.jpg

Here's an end cap I made to get more length. http://bikesmithdesign.com/temp/HiE-end-cap.jpg

The original axles were 0.035" wall thickness which we found to be inadequate. I made a new one from 0.049" but 4130 tubing is always a few thousandths oversized to I had to spin mine on a lathe and sand it to a good fit. Took quite a while. Maybe he was having the axle tubing centerless ground.

The guys who do my CNC work could take a piece of 5/8" x 0.120" 4130 and machine it to exactly 0.500" for you. When they turn tubing down it gets almost a mirror finish. And you could have them make end caps to whatever length you need. They do bike work 1/2 price when business is slow, which it is this time of year. Contact me off-list if you are interested.

Mark Stonich;
     BikeSmith Design & Fabrication
       5349 Elliot Ave S. Minneapolis, Minnesota 55417 USA
            Ph. (612) 824-2372 http://bikesmithdesign.com
                        http://mnhpva.org