There's a Tange Levin CDS with a 30 mm stack height with one spacer, but 22 mm, wow, that is short! Is it the right fork? Perhaps could the top of the head tube be shaved? I've been told you need at least three complete threads engaged on headset locknuts. If I recall a Campy Strada Record is 36 or 38 mm. Super Record was taller.
Did you measure the steer tube length down to the crown race seat? If not (I don't think this is likely, you've been around this a long time) that could be eating up 12-15 mm. Just worthwhile to double-check.
On Wed, Dec 2, 2009 at 1:11 PM, <FujiFish1@aol.com> wrote:
> I've got a friend visiting, looking at bikes and needing a headset for his
> mid 70s Raysport. The head tube is 146mm, and the steer tube is close to
> 168mm, so a difference of approx. 22mm. Can a traditional Campagnolo
> Record steel headsrt be used here, or will it require something with a
> shorter
> stack height? An off topic Chris King unit is on there now, with one
> spacer, and the threads just barely engage the top nut. Any rapid help (or
> any
> help later on too) is much appreciated!
>
> Ciao,
> Mark Agree
> Southfield MI USA
> _______________________________________________
>
--
Ken Freeman
Ann Arbor, MI USA