[CR] latest creation

(Example: Framebuilders:Rene Herse)

From: "Anthony" <Mezzbike1@zoominternet.net>
To: <classicrendezvous@bikelist.org>
Date: Fri, 4 Dec 2009 11:41:41 -0500
Subject: [CR] latest creation

Hi Gang, I hope this doesn't break with the list protocol, if so please forgive me. If anyone is interested to see my latest creation, here is the link. This is the frame that I needed the long seat tube( 72 cm ), steerer and special rear end drop-outs for( I had to have the rear drop-outs made, you can see the blanks in the set of pics) the H20 cutter would not put the hole in them for the adjusting screw so I had to drill and tap them my self , Very precarious.


you may need to add the # at the end of the paste to see it?

Thanks for looking,
Mezzatesta Custom Cycles
Cranberry Twp. PA. 16066