Hi Kurt, Thanks very much. The reason I made the seat stay caps and drop out caps was so I could have a clean break for the paint transition. It did create a bit of extra work. Anthony Mezz
http://www.mezzatestacustomcycles.com
> That is really nice. I'm still figuring out what to do with the SS and
> stainless seat lug area...
> You gave me some ideas...
> Kurt
> ----- Original Message -----
> From: "Anthony" <Mezzbike1@zoominternet.net>
> To: <framebuilders@bikelist.org>
> Sent: Friday, December 04, 2009 9:41 AM
> Subject: [Frame] show and tell, KOF
>
>
>> Hi Gang,
>> If anyone is interested to see my latest creation, here is the link.
>> This is the frame that I needed the long seat tube( 72 cm ), steerer and
>> special rear end drop-outs for( I had to have the rear drop-outs made,
>> you can see the blanks in the set of pics) the H20 cutter would not put
>> the hole in them for the adjusting screw so I had to drill and tap them
>> my self , Very precarious.
>>
>> http://picasaweb.google.com/
>>
>> you may need to add the # at the end of the paste to see it?
>>
>> Thanks for looking,
>> Anthony
>> Mezzatesta Custom Cycles
>> Cranberry Twp. PA. 16066
>> http://www.mezzatestacustomcycles.com
>> _______________________________________________
>> Subscribe/unsubscribe or retrieve password at:
>> http://www.phred.org/
>> Archives: http://www.phred.org/
>> Archive Search: http://search.bikelist.org/