Hey all. More clearing out before the holidays. Prices do not include shipping (estimate $5-$10 ConUS based on size, qty). Paypal is fine as long as it's sent as a personal payment and you pick up the fees. Pics upon request.
Apologies for the couple items that straddle the timeline.
Spidel Team Issue hubset (maillard 700). Low flange with mirror polish. 36h, spaced 100/120. In amazing shape. very little spoke wear. Small nick on one of the black plastic dust caps. These really do look nice. Will also include a set of repro decals as the originals were in bad shape so I pulled them up and polished the hubs. No skewers. Front needs to be repacked, rear still spins smooth. $65
Campagnolo Victory Crankset- Good shape with some strap, pedal rub to drive side arm. Includes 52/42 rings and chainring bolts. Teeth still sharp. 170mm dated 1985- $65
Stronglight 104 crankset in excellent condition. These were sold to me as new, but upon closer inspection, they do look to have been installed. My guess is they are display takeoffs. Some wear along the arms where pedals were installed, but will be covered with a pedal washer. 122bcd, 170mm standard 9/16 pedal threads. 52/42 rings. I've been told these can also be made into triples (according to info on classic lightweights)- $90
NOS Cinelli bar end plugs. Cap style from the 50's and 60's similar to bennotto bar end caps. Red plastic with Cinelli word type. One set- $10
Suntour Cyclone GT touring derailleur. Needs cleanup and some fill in paint, otherwise fine. $15
Early hidden bolt Dura Ace stem. Complete. Scratches here and there. If you're industrious, you can de ano and polish out, otherwise fine for a daily rider. 100mm/25.4. Nice clean looking stem. $50
Steel stem from 50's. Looks similar to a Titan. Missing binder bolt. 65mm- $15
Titan stem circa 1960. Needs chrome. Complete with hardware- $25
**Take both of the above stems for $35
Cinelli 2a track stem. 80's style wordmark logo on top. 100mm/26.4. Surface scratches about that can be polished out. No major nicks. Complete hardware. $65
Early Atom straight block freewheel. 14-18t. 5sp. $20
Spidel branded Mafac LS2 brakeset. Very good mechanical condition, but the few steel/chrome bits need attention as they are pitted. My intention was to polish them out and apply a layer of copy chrome. Never got around to it. Missing barrel adjusters, but all else is complete including the odd mounting hardware. Includes original brake pad holders with cable guides. Will clean up nicely if you have the time. $55
Universal Centerpull brakeset. Mod 61? Only says Universal on the caliper, no model number. But my understanding is they only made one style centerpull. Guessing this is a variation. In very good shape, but need to really be taken apart and cleaned up so they shine. Includes original straddle wires in good shape with no rust. Only one has brake pads, but I would swap these out for continentals anyhow. Rear missing mounting nut which should be easily obtained. $40
3ttt Colnago Panto Stem. Record 84m. 105mm. Signature panto on sides, clover with bands on front. Black ano with some scratches. My plan was to strip ano, polish and fill in panto with paint. $75 (firm)
Vintage Kashimax (not repro) aero NJS saddle. Smooth leather, 4 gold model. Great for older Keirin restro. Couple creases in the leather at the nose, couple scuffs to right side rear. No rips. You could remove the leather for a new looking plastic version if you desire. I have repro decals for the sides for an extra $10. These for a ton with the BMX heads on ebay. Looking for $55 ($65 with decals).
Normandy Luxe Competion wheelset. Low flange, 36h. Red dust caps. Need new barrel decals. Laced to Mavic red label tubulars. Sport maybe. Just a single mavic diamond in square red decal. No other markings. Front rims looks 100% the same without a mavic decal. Has remnants of a green decal that seems to be a diamond shape with a circle in it. Looks familar, but can't place it. Put on sorta hap hazard, so not sure if this is the original decal as the rims do look the same. $75
Mavic Motherly Route tubular rims. 36h. These look like takeoffs. Really nice condition. No corrosion to the eyelets. One small "line" of glue on center of rim. Could have been on a display. Not really sure of the history. But these do look nice. $75
Fiamme Ergal road tubulars in 36h. Very good condition. No brake wear as they were used on the track. Light glue residue. $40
NOS back supports/racks. Look like a cross between the TA/Mafac rack and the Nitto M18. However, these are made from ALLOY. Attaches to center bolt and fork blades via p-clamps (not included) or braze ons. Has a provision to mount a light with a standard nut and bolt. Not the threaded post of the TA versions. $60 ea (two avail)
pic here:
http://www.flickr.com/
As stated above. Pics avail upon request. Also, I'm open to offers if you feel my asking is unreasonable. Shoot me one and we can chat. Will also consider knocking a few bucks off if you buy multiples (depending on the item).
Thanks for looking all.
Sean Flores
San Francisco, CA
USA