Jay wrote: << Interesting seat stay caps. Any guesses as to how it was done? I can't figger it. Dale? >>
Andrew wrote: <<Cut a "V" into the top end of the SS running crosswise. Now you have two points diametrically opposite each other. File one a little bit shorter then the other. Bend the longer one to fit the shape of the seat lug then bend in the short outer point with a distinctive flattened shape.>>
I like that scenario Andrew, but I am guessing it's less fancy & skilled... I think it was a plug in "top eye" they (who?) just filed slots/shelves into...
Let's get some paint stripper and take a look . :) (OH NO!)
Dale Brown Greensboro, North Carolina USA http://www.classicrendezvous.com
-----Original Message----- From: Andrew R Stewart <onetenth@earthlink.net> To: jvs@sonic.net; classicrendezvous@bikelist.org Sent: Wed, Dec 23, 2009 1:41 pm Subject: Re: [CR] Stylin' 'nago
Jay- My question also. Here's my take on the caps. Cut a "V" into the top end of the SS running crosswise. Now you have two points diametrically opposite each other. File one a little bit shorter then the other. Bend the longer one to fit the shape of the seat lug then bend in the short outer point with a distinctive flattened shape. This give you a stepped pair of points, one on top of the other. Braze it up and file to clean up the dual shore lines.
----- Original Message ----- From: <jvs@sonic.net>
To: <classicrendezvous@bikelist.org>
Sent: Wednesday, December 23, 2009 1:21 PM
Subject: [CR] Stylin' 'nago
> Wow! Thanks for bringing it to our attention! Interesting seat stay
> caps. Any guesses as to how it was done? I can't figger it. Dale?
>
> Jay Sexton
> Sebastopol, CA
>
>
> Message: 10
> Date: Wed, 23 Dec 2009 09:51:17 -0800
> From: EPL <lowiemanuel@yahoo.ca>
> Subject: [CR] Stylin' 'nago
> To: <classicrendezvous@bikelist.org>
> Message-ID: <523141.8291.qm@web50502.mail.re2.yahoo.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Better sit down before clicking here:
>
> http://ebay.com/
>
> (No relation, but sure wish there was...)
>
> Emanuel Lowi
> Montreal, Quebec
>
>
>
> _______________________________________________
Andrew R Stewart
Rochester, NY