Re: [CR] EA 100 DURA ACE HUB?

References: <8CC50003F5CA27C-2F94-2CA39@webmail-m010.sysops.aol.com>
Date: Tue, 22 Dec 2009 14:34:23 -0800
From: "David Kulcinski" <dkulcinski@yahoo.com>
To: <robertsasher@aol.com>, <classicrendezvous@bikelist.org>
In-Reply-To: <8CC50003F5CA27C-2F94-2CA39@webmail-m010.sysops.aol.com>
Subject: Re: [CR] EA 100 DURA ACE HUB?

You should be able to have good welder weld it up; then grind down & polish.

David Kulcinski Orange, CA

________________________________ From: "robertsasher@aol.com" <robertsasher@aol.com> To: classicrendezvous@bikelist.org Sent: Sun, December 20, 2009 6:55:54 PM Subject: Re: [CR] EA 100 DURA ACE HUB?

My rear large flange dura ace hub has 2 cracks in the flange directly opposing each other,one is worse than the other ,but terminal as I understand it? my question is can it be reapaired? or does anyone happen to have a large flange shell that could be bought?these are the ea100 with oil port, with rear spacing of 120mm (5speed) ,thanks Brad Sasher ,Atlanta ,Ga USA