Re: [CR] Raleigh Professional Mark IV--high BB

(Example: Framebuilders:Rene Herse)

From: <"kohl57@starpower.net">
To: <jerrymoos@sbcglobal.net>, <classicrendezvous@bikelist.org>, <gillies@ece.ubc.ca>
Date: Wed, 25 Feb 2009 15:55:48 -0500
Subject: Re: [CR] Raleigh Professional Mark IV--high BB


The is a "1971" Carlton catalogue showing the Carlton Team Professional which appears to be 1) with conventional seat stays and 2) without the customary Cinelli style sloping crown fork:

http://www.carltoncycles.me.uk/racers/race71.html

or indeed also in the "1970" Carlton catalogue as well:

http://bulgier.net/pics/bike/Catalogs/carlton70/03.JPG

further clarified by the framsets then on offer:

http://bulgier.net/pics/bike/Catalogs/carlton70/07.JPG

The "1970" Carlton Professional frameset being sans fastback stays as is the "Competition" frameset (which reads like it might be the closest Carlton model to the Raleigh Mark I Pro) but the Giro d'Italia having fastback stays. The Professional frame is clearly stated as having Zeus dropouts, too.

Finally there is a "1971" Raleigh-Carlton catalogue:

http://bulgier.net/pics/bike/Catalogs/Retro-Raleighs/71-Catalog.pdf

The Professional and International are on the cover, full specs in the back. But it's already list as a Mark III.

Peter Kohler Washington DC USA

Original Message: ----------------- From: Jerome & Elizabeth Moos jerrymoos@sbcglobal.net Date: Wed, 25 Feb 2009 12:07:58 -0800 To: classicrendezvous@bikelist.org, gillies@ece.ubc.ca Subject: Re: [CR] Raleigh Professional Mark IV--high BB

Well I have a Mk I, or at least the mostly white Pro, with a 1970 serial number, even though it corresponds to the 1969 catalog. The catalogs sh ow the 1970 Mk II with the fastback stays, and different geometry. Perhaps they built some Mk I's in 1970 to use up the older tubesets, much as Schwinn built the early 80's Superior to use up leftover Paramount tubesets. Or maybe they had some delay in rolling out the Mk II in 1970 , so continued the Mk I until the Mk II was in production.

BTW, did any of Pros after the Mk I and before the Team Pro have conventional seatstays, as opposed to the Brampton fastback stays? I co uld have sworn I'd seen early 70's Pros in the mink brown color with conventional stays, but the 1970 catalog at RetroRaleighs shows the 1970 M k II already with the Brampton stays. There is no 1971 catalog there, so no photo of the MK III, but the 1972 catalog shows the MK IV with Bramption stays (best as I can make out). I suppose they might have gone to Bramp ton stays on the Mk II, then back to conventional on the MK III, then back to Brampton again on the MK IV. But that would be very strange, even for Raleigh.

Regards,

Jerry Moos
Big Spring, Texas, USA


--- On Tue, 2/24/09, donald gillies wrote:


> From: donald gillies <gillies@ece.ubc.ca>
> Subject: Re: [CR] Raleigh Professional Mark IV--high BB
> To: classicrendezvous@bikelist.org
> Cc: jerrymoos@sbcglobal.net
> Date: Tuesday, February 24, 2009, 7:24 PM
> The Raleigh Pro's indeed have very short top-tubes. I
> have a feeling
> that's because they were supplied with longer stems
> than you usually
> see on a racing frameset, perhaps to make the italianesque
> and
> short-wheelbase design more stable to steer.
>
> By the way, the Carlton Giro D'Italia - which is the
> basis for the
> Mark II, III, and IV models - is a very old model, going
> back to the
> early 1960's. In the late 1960s when Raleigh began
> importing bikes
> into the USA, I think the first model they imported was the
> top-of-the-line Carlton Flyer, which was badged as a
> Professional and
> later retitled "Professional Mark I".
>
> I am wondering what is the difference between a
> Professional Mark II,
> III, and IV because they all appear to be similar to the
> Giro D'Italia
> in the Carlton Catalogues. What were they were tweaking in
> 1971 and
> 1972?
>
> Incidentally, I doubt that anyone owns a 1970 Mark I.
> Beause that
> would mean that in 1971, the Mark II AND the Mark III were
> both
> released in the same year!
>
> - Don Gillies
> San Diego, CA, USA
> ________________________ _______________________

_________________________ ______________________

--------------------------------------------------------------------
mail2web.com – What can On Demand Business Solutions do for you?
http://link.mail2web.com/Business/SharePoint