Re: [CR] Proper cyclocross gearing for the Mondia?

(Example: Production Builders:Teledyne)

Date: Thu, 7 May 2009 07:59:11 -0400
From: "Jonathanadamgree" <>
To: John Siemsen <>, <>
In-Reply-To: <>
References: <>
Subject: Re: [CR] Proper cyclocross gearing for the Mondia?


If you're gonna just ride the bike then gear it like you would a road bike. If I were going to set it up like a race bike I'd use a single 42 in the front with a 13-26 in the back. For a few more options a 42-46 in front would be ok too.

Jonathan Greene Oviedo FL

In a message dated 05/06/09 16:24:41 Eastern Daylight Time, writes:

Equipping this 1982 Mondia cyclocross frame on shown on CR:

The frame came to me via Larry Meyers, via Matt Gorski? via Eric Elman?

Building with circa 1979 Nuovo Record components, Weinmann cantilevers (rebranded Mafac's I believe), Cinelli bar/stem, Turbo Speciale saddle.

Question for the list - is there a typical gearing for cyclocross? Chainring size? Gear range?

John Siemsen
Portland, Oregon