Re: [CR] Waxing to protect paint?


Example: Framebuilders:Jack Taylor
In-Reply-To: <122808.12227.qm@web110614.mail.gq1.yahoo.com>
References: <122808.12227.qm@web110614.mail.gq1.yahoo.com>
Date: Fri, 3 Jul 2009 16:05:40 -0500
From: <globallyoff@s2ki.com>
To: Steve Whitting <ciocc_cat@yahoo.com>
Cc: classicrendezvous@bikelist.org
Subject: Re: [CR] Waxing to protect paint?


Personally I use Klasse Sealant-Glaze, and then put a coat of P21S or whatever your favorite carnauba is. It is not necessary for Imiron or similar paint,but will smooth out the imperfections and seal the chips against rust, as previously mentioned on a recent post.

Keith Kessel Shreveport, La. USA

On Fri, July 3, 2009 3:38 pm, Steve Whitting wrote:
> I've read various pros and cons over the years regarding this.  I've read
> that some car waxes are supposedly unsuitable and that you should use
> something like "Pledge" furniture polish (if you're going to wax at
> all).  I realize the type of finish (modern epoxy vs old-school) probably
> has a bearing on this.  Comments appreciated. Steve Whitting
> "The Ciocc Cat"
> Prairieville, Louisiana USA
> Website at http://ciocc-cat.angelfire.com/