[CR] FS: TA Cyclotouriste, Phil hubs and BB

(Example: Framebuilders:Tony Beek)

Date: Wed, 20 Jan 2010 20:33:20 -0700
From: <derek@frameref.com>
To: <classicrendezvous@bikelist.org>
Subject: [CR] FS: TA Cyclotouriste, Phil hubs and BB


A few items up for sale - all prices include CONUS shipping. I'm happy to ship international - please contact me for prices. Though I've not sold much here on the list, I've got 100+ feedback on ebay, mostly vintage parts, under the seller name UBUGATO. Paypal at this address; please contact me off list to insure items are still available. Pictures here: http://picasaweb.google.com/Derek.Vandeberg/CRComponents

TA Cyclotouriste crankset - 170mm arms, BSC threads, 46/42/26 rings. Circa '80, unridden since about '88. Good used condition with some chainring wear and a few noteable marks as shown in the photos - chain drop on the inside and near the pedal threads of the right arm, scratch in the back of the left arm (not a crack.) No rust, original decals, threads and tapers basically perfect - no flaws. Dustcaps included - some brass showing through the chrome. No crank bolts. Cleaned, but not polished - would be pretty spiffy with a little elbow grease. These are riders, not wall art. $130

Phil Wood bottom bracket that was mated to this crank - ISO tapers, 119mm. No rings. No rust, minimal marking on the tapers - really quite good. Bearings are original, but have been cleaned and packed with fresh Phil grease - smooth and notch free, ready for a few decades more on a rider. $50

Phil Wood hubs, circa '79 - 36 hole, Q/R front, 120mm bolt on rear, BSC threading. Built only once, 4x pattern - flanges show spoke marks, not excessive. Stainless barrels, not the earlier chrome. No rust, perfect red Phil logos, again, these have been cleaned, but not polished - barrels are perfect, flanges would shine up nicely. As with the BB, original bearings with fresh grease, smooth, no play. Will include a curved lever Campy front skewer if you wish. $150

Thanks in advance for your interest, and again, please contact me off list. More to come over the next week or so, including a good Simplex Super LJ triple front changer, Suntour Sprint/MA40 wheels, Specialized 180mm triple crank, some (GASP) off topic 1st gen C-Record Deltas, shifters and wheels, and whatever else I've decided to clear out of the garage.

Cheers,
Derek Vandeberg
Bigfork, Montana