Offered to CR members are some interesting frames and lots of good parts.
I can take payment a number of ways - Paypal or cheque in GBP, cash sent registered post, Traveller\u2019s cheques in $, direct bank transfer within the UK or European Iban bank transfer. I will always combine shipping in order to reduce costs.
All prices are in UK GBP Frames cost 80 GBP to ship to the USA, 100 GBP to ship to Australia/New Zealand and 11 GBP within the UK.
With the pound being low in value these are a real bargain... for US and European buyers. Paypal is quoting 1.55$ to 1 GBP.
Hilary Stone, Bristol, British Isles
EDDY MERCKX PROFESSIONAL 1987
Seat Tube (ctc): 53cm
Top Tube (ctc): 54cm
Rear dropout width: 126mm
Wheel size: 700C
Seatpost size: 27.2mm
Bottom bracket threads: Italian
Brake drop with 700C wheel: 45mm
Eddy Merckx frames are really rather nicely made and ride really nicely.
This one dating from about 1987 is in exceptionally sound condition
though the paint is a little tatty. Its almost certainly built from
Columbus SLX tubing. 165 GBP
http://i141.photobucket.com/
SAXON TWIN-TUBE TANDEM c1938
Saxon are best known for their twin seat tube solo bicycles but the
design was first used in 1937 to make a short wheelbase tandem frame.
The TT tandem frames were produced in relatively small quantities up
until WWII. This frame has at some time been \u2018modernised\u2019 with a down
tube gear lever boss and Mafac cantilever brakes. It also sports
transfers from apparently touring in the Alps... I think it has 21in
seat tubes front and rear but will take proper measurements for anybody
seriously interested. It will make a superb project which will be very
unusual. Shipping to the USA will be 110 GBP.
165 GBP
http://i141.photobucket.com/
RAULER 61cm c1980
Seat Tube (ctc) : 61cm (22.5in)
Top Tube (ctc): 59cm (21.75in)
Rear dropout width: 126mm
Wheel size: Sprints or 700C (brake drop of approx 46mm)
Bottom bracket threads: Italian
Seatpost size: 27.0mm
This c1980 Rauler frame is of really gorgeous quality - the lugs are
beautifully cut out and the brazing is very clean. The frame is in
excellent condition. Greg Softley (Ebay gts753) does reproduction
transfers.
Rauler was founded in the 1970s by Raul and Reclus Gozzi Brothers. One
or both brothers worked for Colnago before starting up the Rauler
marquee. It is not know just what the relationship with Ernesto was, but
what is known that the name Rauler is from Raul and the first two
letters of Ernesto, hence Rauler. Rauler became one of the top contract
builders for Colnago and did much of the pantographing for them as well.
It has been repainted not especially well but would be quite useable.
There are no dents or dings I can see. 175 GBP
http://i141.photobucket.com/
MOTOBECANE SPECIAL PRO ROAD FRAME c1983
Seat Tube (ctc): 59cm (23.25in)
Top Tube (ctc): 59cm (23.25in)
Rear dropout width: 126mm
Wheel size: Sprints or 700C (brake drop of approx 48mm)
Frame tubing: Columbus SL
Seatpost size: 26.8mm
Motobecane frames were ridden in the 1970s to a Tour De France win and
their Team was one of the top continental pro road teams. This frame,
the European equivalent of the Team Champion sold in the USA is built
from Columbus SL tubing and dates from around 1977. Its in absolutely
gorgeous condition with only a very few very minor marks to the paint.
It comes complete with its original Laprade seatpost and Motobecane
saddle and sleeved bars and stem. 145 GBP
http://i141.photobucket.com/
Handlebar Stems
3TTT GRAND PRIX 9cm STEM NOS 1960s/70s but with a few minor marks,
nevertheless excellent £24
http://i141.photobucket.com/
CINELLI 1A STEMS 26.4mm clamp NEW OLD STOCK NIP
7cm, 8.5cm, 10.5cm(not shown in photo), 11.5cm
33 GBP each
http://i141.photobucket.com/
CINELLI 1A BLACK STEM excellent with some very minor little marks 19 GBP
http://i141.photobucket.com/
GB KROMO STEEL STEM chrome useable on bike with a bit of patina or would
rechrome beautifully 35 GBP
http://i141.photobucket.com/
GB RTE 8.5cm STEM NOS few small marks rare stem with circlip making
wedge release automatic 1980s as fitted as standard to Moulton AMs £19
http://i141.photobucket.com/
GB SPEARPOINT ALUMINIUM STEM 8cm factory drilled for centre-pull brake
cable NOS 29 GBP
GB SPEARPOINT ALUMINIUM STEM 10cm excellent, almost unused 22 GBP
http://i141.photobucket.com/
SR ROYAL HANDLEBAR STEM 9cm in very good condition with just a few minor
marks 12 GBP
http://i141.photobucket.com/
3TTT BARS AND STEM with FACTORY FITTED BLACK LEATHER SLEEVES Campag
brake lever fittings Truly stunning 49 GBP
http://i141.photobucket.com/
EARLY SHIMANO DURA-ACE GEARS
(4) SHIMANO CRANE REAR GEAR NOS NIB DR101 1st version from 1971-73 part
of the first Dura-Ace groupset £34
(5) SHIMANO CRANE REAR GEAR DR101 used but very good 1st version from
1971-73 part of the first Dura-Ace groupset £19
(6) SHIMANO CRANE REAR GEAR DB-100 3nd version from 1976-8 with metal
pulleys part of the first Dura-Ace groupset £22
(7) SHIMANO CRANE GS LONG-CAGE GEAR **NOS** DB-110 £29
(8) SHIMANO CRANE REAR GEAR DB-100 3nd version from 1976-8 with plastic
pulleys £12
(9) SHIMANO DURA-ACE FRONT DERAILLEUR SILVER 1970s **New** £19
(10) SHIMANO DURA-ACE FRONT DERAILLEUR BLACK 1970s **New** £18
(11) SHIMANO DURA-ACE FRONT DERAILLEUR SILVER 1970s Excellent £14
(12) SHIMANO DURA-ACE DOWN TUBE LEVERS 1970s **NEW OLD STOCK** £15
http://i141.photobucket.com/
ALUMINIUM COTTERED CHAINSET 165mm no name, probably French must be
1940s/50s in excellent condition, English pedal threads 55 GBP
http://i141.photobucket.com/
BAYLISS WILEY FEATHERWEIGHT BOTTOM BRACKET SET in excellent condition
with a couple of very minor marks to bearing surfaces (not pitting, more
staining) 29 GBP
http://i141.photobucket.com/
CAMPAGNOLO STEEL SEATPOST 26.8mm some light scratches to bottom section,
some corrosion to top section on back, rare 79 GBP
http://i141.photobucket.com/
CAMPAGNOLO 12-18T 7-speed freewheel NOS complete in all original
packaging 125 GBP
http://i141.photobucket.com/
CAMPAGNOLO SUPER RECORD 2-BOLT c1977 27.0mm 155mm rails to limit mark
flutes been infilled black excellent very rare pin in this condition 39 GBP
http://i141.photobucket.com/
HURET LEGER TOURIST 3spd REAR GEAR 1940s NOS NIB complete with
instructions 55 GBP
http://i141.photobucket.com/
LLOYD SADDLEBAG SUPPORT excellent £15
http://i141.photobucket.com/
MANSFIELD ACE SADDLE cutaway shape like Swallow but tied underneath,
very nice condition and certainly rare, badge is broken on one side 65 GBP
http://i141.photobucket.com/
SAN MARCO GP SEATPOST 27.2mm 135mm rails to limit mark 1970s really nice
and pretty seatpost **New Old Stock** 14 GBP
http://i141.photobucket.com/
STRONGLIGHT 99 TRIPLE CHAINSET 1st type not illustrated in Brodericks
timeline 52/40/34T rings Excellent cranks 170mm , 86mm bcd, French
threaded, perfect tapers and threads, I can retap to English if
required. Middle ring has a little wear others almost none. Very rare
and beautiful c 1969 95 GBP
http://i141.photobucket.com/
STURMEY-ARCHER K type 3-speed gear 1930s \u2013 looks to be lightly used 40H
39 GBP I can service this gear before shipping if required...
http://i141.photobucket.com/
TA 27T ONE INCH PITCH CHAINRING 5-pin rare in very good condition 18 GBP
http://i141.photobucket.com/
TA CRITERIUM CRANKSET 170mm c1963 complete with 130mm long axle in very
lightly used condition, axle has perfect bearing surfaces 115 GBP
http://i141.photobucket.com/
TA TRACK PEDALS NOS NIB 125 GBP
http://i141.photobucket.com/
WILLIAMS INCH PITCH SET with 22T, 23T, 24T, 25T, 26T rings, 6T and 8T
sprockets and 46 link Coventry inch pitch chain in very good condition
Complete set 145 GBP
http://i141.photobucket.com/