[CR] Components on 1972 Raleigh Team bike

(Example: Framebuilding)

From: "JEROME JUDITH IDE" <j-eide@msn.com>
To: <Classicrendezvous@bikelist.org>
Date: Tue, 13 Apr 2010 18:09:07 -0500
Seal-Send-Time: Tue, 13 Apr 2010 18:09:07 -0500
Subject: [CR] Components on 1972 Raleigh Team bike


I have a 1972 Raleigh Team frame and don't know where to go to find the components that need to go on it. The 1972 Raeigh Team picture at http://www.carltoncycles.me.uk/racers/race72.html<http://www.carltoncycles.me.uk/racers/race72.html> shows a team bike. The frame I have has a Carlton headbadge and it has front deraileur cable stop on the down tube and a rear deraileur cable guide on the bottom bracket. The frame serial number is F8663. The frame is about 1cm bigger than the 23 1/2" 1972 Raleigh Pro that I have (serial number G789) and doesn't have the cable stop or cable guide like the Team frame. The other dimmensions are within 2mm of each other. The Team fork has reinforcing tangs on the inside (next to tire) just below the fork crown. I would like to know what deraileurs, side pull brakes, pedals and hubs were used on the Team bike.

Jerry Eide
Moorhead, Mn. USA
218-287-3404