Re: [CR] Chainrings for a three-bolt crank?

(Example: Events:Cirque du Cyclisme:2007)

Date: Wed, 14 Apr 2010 22:16:12 -0400
From: "James Swan" <jswan@optonline.net>
In-reply-to: <E1O2ALq-00050z-EI@elasmtp-galgo.atl.sa.earthlink.net>
To: Mark Stonich <mark@bikesmithdesign.com>
References: <2bc3b.5c94e950.38f78d85@aol.com>
Cc: PBridge130@aol.com, classicrendezvous@bikelist.org
Subject: Re: [CR] Chainrings for a three-bolt crank?


I'm actually looking for a chainring for those cranks as well. I'd love to find a track (1/2 x 1/8) ring in 42 or 44, or even an inch pitch ring in 21 or 22.

Thanks, Jamie Swan Northport, NY, USA

On Apr 14, 2010, at 5:43 PM, Mark Stonich wrote:
> At 4/14/2010 05:28 PM -0400, PBridge130@aol.com wrote:
>> Gang,
>>
>> I've got a three-bolt Campy crank. I'd like to use it with a
>> single-speed. Can anyone direct me to a 46-47-48-ish ring? Or I
>> suppose I'll just use
>> the 52, and gear down on the rear.
>>
>> I saw that crank in a single-speed set-up last Sunday at the San
>> Diego
>> show, looked like they had scored beautiful alloy rings. What's
>> out there?
>>
>> Thanks for any ideas,
>>
>> Peter Bridge
>> san diego ca usa
>
> I've got Stronglight alloy 36-46 on mine.
> http://bikesmithdesign.com/MyBikes/raleigh/campi-steel.jpg
>
> I know a guy with a box of NOS Stronglight rings. I could see if he
> has anything for that BCD.
>
>
> Mark Stonich;
> BikeSmith Design & Fabrication
> 5349 Elliot Ave S. Minneapolis, Minnesota 55417 USA
> Ph. (612) 824-2372 http://bikesmithdesign.com
> http://mnhpva.org