Re: [CR] MAFAC Modifications.

(Example: Component Manufacturers:Ideale)

References: <mailman.42.1272417799.34030.classicrendezvous@bikelist.org> <B61B1525-4363-4AE7-9EFB-8B9F9B7652A3@gmail.com> <w2r9fb8b4e41004272253u2802a41cibc4171edec8b3a93@mail.gmail.com>
To: classicrendezvous@bikelist.org
Date: Wed, 28 Apr 2010 10:41:52 -0400
In-Reply-To:
From: <oroboyz@aol.com>
Subject: Re: [CR] MAFAC Modifications.


Those brakes look nice! I have super polished some vintage era brakes too, it's rewarding work.

This reminds me of a story from the early 1970s.

McLean Fonvielle, maker of Silk Hope and McLean frames, took a set of Weinmann 610 center pulls and filed off all the ridges and casting traces and polished it to a satin luster. He replaced the Weinmann pads & shoes with Campy holders, and mounted the set with Campy brake levers on his touring bike. Seemed a logical ultra nice set up for a touring rig...

Later a friend saw the set up when he visited the Clean Machine bike shop (one of the original Turin Co-op members) and Mclean jokingly asked him "Have you seen these already? ... the new Campy center pulls?" In a short time, everyone was talking about Campagnolo's new center pull!

McLean set folks straight when he had the chance but it was a good laugh for a while....

Dale Brown cycles de ORO, Inc. 1410 Mill Street #100 Greensboro, North Carolina 27408 USA 336-274-5959 http://www.cyclesdeoro.com http://www.classicrendezvous.com http://www.carolinacup.com \u201cLife is like riding a bicycle. To keep your balance you must keep moving\u201d A.Einstein

-----Original Message----- From: Joe Bunik <jbunik@gmail.com> To: CLASSIC RENDEZVOUS <classicrendezvous@bikelist.org>; Sean Flores <seaneee175@gmail.com> Sent: Wed, Apr 28, 2010 1:53 am Subject: Re: [CR] MAFAC Modifications.

And here are my NOFACs thus far... http://www.flickr.com/photos/66275745@N00/sets/72157623947963344/

I took the roughest-cast, dirtiest one I could find and went to town with the file and emery. Rounded-out all the corners and edges and removed all flashing left behind by the fine craftspeople at Mafac...

Anyone have extra sets of the chrome "Deluxe" hardware? My pad-mounting-posts have rusted away to nothing, but curiously the pivot bolts remained near-spotless - how does that happen?

=- Joe Bunik Walnut Creek, CA

On 4/27/10, Sean Flores <seaneee175@gmail.com> wrote:
> Took a pic of the set I'm working on:
>
> http://farm5.static.flickr.com/4038/4559872422_d6910f165b_b.jpg
>
> The drillium was a little much, but fun to do. Made a quick template from a
> piece of sheet metal and drilled away. This probably won't help the already
> nasty flex the arms already suffer. But if they do snap, they'll look good
> doing it!
>
> Next steps are to plate the other steel bits with brass, get a new set of
> springs, steal a set of brass bushing from a ragged pair of dural forge I
> have and lastly, decide on which brake pads/holders to go with. Classic
> MAFAC? Or something more modern with some easier toe in adjustment.
>
> Sean Flores
> San Francisco, CA
>
>
> On Apr 27, 2010, at 6:23 PM, classicrendezvous-request@bikelist.org wrote:
>
>> Message: 3
>> Date: Tue, 27 Apr 2010 13:14:21 -0700
>> From: Joe Bunik <jbunik@gmail.com>
>> Subject: Re: [CR] Mafac Modifications
>> To: sean flores <seaneee175@gmail.com>
>> Cc: c r <classicrendezvous@bikelist.org>
>> Message-ID:
>> <k2y9fb8b4e41004271314q742e3c78ja2fa8a0fb1e126d9@mail.gmail.com>
>> Content-Type: text/plain; charset=ISO-8859-1
>>
>> Hi Sean
>>
>> You literally read my mind. Was just contemplating my lack of chrome
>> "deluxe" Mafac hardware to pair up with these, then realized I could
>> probably more easily go have the bits chromed-up rather than seek out
>> more NOS stuff! Maybe I'll try one of those brush-on kits.
>>
>> I'd love to see how yours turn out. I made quick work of the first of
>> four arms last night, next up will be more of an assembly line
>> approach... can't wait to try out those new Kool-Stop blocks.
>>
>> =- Joe Bunik
>> Walnut Creek, CA