Re: [CR] 3 Rensho Allez?

(Example: Framebuilders:Brian Baylis)

References: <PLEDLMNNAFGCJOAIICLBAEBOEPAA.beandk@rcn.com> <AANLkTil_l73JzS8vy-4q6JrMHVoI2ZI7sNITQXRDIV8X@mail.gmail.com>
In-Reply-To:
From: "Drew Ellison" <drewridesbikes@gmail.com>
Date: Mon, 14 Jun 2010 22:31:12 -0700
To: Fred Blasdel <blasdelf@gmail.com>
Cc: CR List <classicrendezvous@bikelist.org>, beandk@rcn.com
Subject: Re: [CR] 3 Rensho Allez?


The 3Rensho-built Allez frames did not always have Campagnolo dropouts. I had one with Campy dropouts and one with Shimano dropouts. The dropout facings on both were chromed. Both had forward-sweeping crowns and very long point lugs. And painted red of course.

Drew Ellison Everett, Washington USA

On Jun 7, 2010, at 2:35 PM, Fred Blasdel wrote:
> On Mon, Jun 7, 2010 at 11:29 AM, David Bean <beandk@rcn.com> wrote:
>
>> http://boston.craigslist.org/bmw/bik/1779875345.html
>>
>> Can anyone ID the maker of this bike? Should I jump on it?
>>
>
> Probably made by Miyata or one of the other big Japanese houses, but
> definitely not a 3Rensho.
>
> For starters it's about 10 years too new, but the 3Renso frames were always
> painted bright red with Campy dropouts. The fork crown on this is similar
> but not quite it.
>
>
>
>> Also note the interesting wear pattern on the rear rim. It seems to be
>> related to the spokes. Could the rim be ever-so-slightly wavy from too
>> much
>> spoke tension?
>>
>
> The wear is from exactly the opposite -- the rim isn't wavy at all anymore

> :)

>

>

> Fred Blasdel

> Seattle, WA