Re: [CR] WTB: Top-tube mounted brake cable stops

(Example: Component Manufacturers:Cinelli)

In-Reply-To: <9327C3B25BD3C34A8DBC26145D88A9071732A8@hippy.home.here>
References: <201006242127.o5OLRKNe020950@melipona.ucdavis.edu> <678892.25606.qm@web63402.mail.re1.yahoo.com>
Date: Fri, 25 Jun 2010 13:04:00 -0500
From: "Harry Travis" <travis.harry@gmail.com>
To: Mark Bulgier <Mark@bulgier.net>
Cc: Classic Rendezvous Bike List <classicrendezvous@bikelist.org>
Subject: Re: [CR] WTB: Top-tube mounted brake cable stops


OP here:

Yes, it is a slender, nominal 1" top tube, part of the reason I'd like to get rid of any plastic housing along the length of the gold anodized finish, as have the brake cable mimic the der cables on the down-tube. As for what God intended, it isn't clear she intended epoxied joints to last, in use for 36 years. Engineers have suggested I have the bike flux-dyed and X rayed before riding, something I would not expect to be able to pay for prior to the crash that damages -- or is suspected to have damaged -- the skeletal parts of my own body.

Kim: Thanks for the Rivendell ref. What with the contemporary frame world gone to plastic and oversized aluminum, I wonder what those strong Tektro-looking clamps might do to the tubes they could be over-torqued to, but that's an off-topic wonderment.

I wrote "tinker-toy Alan" with modesty, because while it was the first fine frame I owned, I appreciate that on this list it is an accident of timing that bikes of Italian engineers whose joinery expertise was in the chemistry of screwing-and-gluing with soft-polished lugs are not off-topic.

I appreciate concern for soft-braking. But, it is the rear brake, where softer but not total loss of braking would be OK. Still, I get the point.

Private offers of sales for a pair of new or used cable clamps or clamps with stops, packed between a pair of cardboard pieces in a first class mailed envelope gratefully accepted.

Harry Travis Pine Barrens of NJ USA

On Thu, Jun 24, 2010 at 6:18 PM, Mark Bulgier <Mark@bulgier.net> wrote:
> Kim Carney wrote:
>
> > It's not vintage and off-topic, but I'll take a chance and provide
> > a link to these.
> >
> > http://www.rivbike.com/products/show/clamp-on-cable-stops/51-020
>
> But does the OP's bike ("1974 tinker-toy Alan") have an oversized top
> tube? If he had standard housing clips previously, then he probably has
> a 1" top tube. They don't list the clamps as coming in 1" size.
>
> Shimming it would be ugly, and would add one more place for it to slip.
>
> I'd go for replacing the regular clips and sticking with housing all the
> way back, the way God intended.
>
> Mark Bulgier
> Seattle, WA USA
>
> _______________________________________________
>

--
Harry Travis