Re: [CR] Stack height - threading

(Example: Framebuilding:Technology)

From: "Putman, Clyde" <cputman@mail.smu.edu>
To: verktyg <verktyg@aol.com>, "Classicrendezvous@bikelist.org" <Classicrendezvous@bikelist.org>
Date: Sat, 10 Apr 2010 15:28:07 -0500
Thread-Topic: [CR] Stack height - threading
Thread-Index: AQHK2OyCDCmMQFDnN0KTPqydvz8GDQ==
Accept-Language: en-US
acceptlanguage: en-US
Subject: Re: [CR] Stack height - threading


OOPs! English / Italian.

Clyde "always forgetting the specifics" Putman Dallas, TX,USA, Earth

________________________________________ From: verktyg [verktyg@aol.com] Sent: Saturday, April 10, 2010 3:26 PM To: Putman, Clyde; Classicrendezvous@bikelist.org Subject: Re: [CR] Stack height

What size threads - French or British (or Italian)?

Check out this message from the archives:

http://search.bikelist.org/getmsg.asp?Filename=classicrendezvous.11003.0717.eml

Chas. Colerich Oakland, CA USA

Putman, Clyde wrote:
> I am in need of an on topic headset with a short stack height.
> Any suggestions?
> I am remembering that the Stronglight A-9 was about as short as they get?
> Thanks in advance for any advice!
>
> Clyde "short is good" Putman
> Dallas, TX, USA, Earth