Re: [CR] Front Dropouts on the Bertin

Example: Framebuilding:Norris Lockley

From: "Peter Rogers" <>
To: "Todd Teachout" <>
References: <>
In-Reply-To: <>
Date: Sat, 10 Jul 2010 00:48:02 -0400
Subject: Re: [CR] Front Dropouts on the Bertin

Hi Todd, I just rubbed away some paint from the front dropouts of the Bertin. I can clearly see the word "GIPIEMME" on them. I'll tackle the rear dropout tomorrow. All the best, Peter Rogers Barrie, Ontario, Canada

From: "Todd Teachout" <>
Sent: Friday, July 09, 2010 11:04 PM
To: <>
Subject: Milremo vs Campag Dropouts

> Milremo dropouts had an eyelet forged into the cutout part of the eyelet.

> Campagnolo eyelets if they had fender eyelets, are alway outside of the

> cutout area. I have two bike with milremo dropouts. I could provide a

> pic if that is necessary for confirmation.


> I always thought the Milremo dropouts were more aesthetically appealing

> than the Campag dropouts.


> Both usually had the brand stamped onto the clamping surface. Sometime

> paint or polishing obscured the stampings. Milremo had script lettering.

> Campag had block lettering.


> Todd Teachout

> Hercules, CA, USA