Re: [CR] Relative stack heights for CR timeline Headsets>>Mission Complete!!<<

(Example: Racing)

Date: Tue, 4 Jan 2011 17:56:58 -0800
From: "Matt Gorski" <>
Subject: Re: [CR] Relative stack heights for CR timeline Headsets>>Mission Complete!!<<

Thanks for all the input especially Scott M. I managed to find a very nice older Tange Levin in my stash... I replaced the first gen Dura Ace HS and got enough space to fit a cable hanger and get plenty of engagement with the top nut. I am building a 650B conversion for my wife..... the cat is outta the bag so I need to wrap it up presto!!

Matt Gorski Milano CC Belmont Shore, Calif-USA

On Tue, Jan 4, 2011 at 12:17 PM, Matt Gorski <> wrote:
> Folks,
> I've checked the archives and Velo base and now appeal to the greater
> Brother/Sisterhood
> of vintage bicycle riders. I have a frameset that has just a few scant
> threads engaging the
> top locknut. I have measured the stack height of several Campy and other
> headsets looking
> for a lower stackheight to create space for a center pull cable hanger and
> for more positive
> engagement for the top nut.
> I can't yet locate my box of Stronglight headsets and various other non
> Campy models. I know
> that Tange makes some basic/nondescript models currently that are low on
> the stack height
> scale. Before I send off for one I wonder if anyone in a similar situation
> has suggestions
> for models with low stackheights on the low 30's but keeping with the
> vintage look.
> TIA for any good info....
> Matt Gorski
> Belmont Shore,
> Sunny Southern California