Re: [CR] What size Velo Orange BB for classic Stronglight cranks?

(Example: Humor)

Date: Tue, 8 Feb 2011 08:44:56 -0800 (PST)
From: "Thomas Adams" <thomasthomasa@yahoo.com>
To: classicrendezvous@bikelist.org, Howard Darr <hdarr@embarqmail.com>
In-Reply-To: <248B2FEE2EB04801A12BA68D715F6B85@UserPC>
Subject: Re: [CR] What size Velo Orange BB for classic Stronglight cranks?


Dear List:

A note from Velo Orange suggests the 118 with a spacer as the way to go.  However they also caution that some old Stronglight cranks had an ISO taper (Campy style).  That's a new one to me, and a check of the archives for "stronglight taper" didn't come up with anything on this issue.  Were there old models of Stronglight Cranks with ISO tapers?  My understanding is that Stronglight (and TA) arms aren't exact JIS either, but close enough for a working fit. 

I would still appreciate any input from someone who acutally used a VO BB with a Stronglight double vintage crank, for a real world check on what works.  Thanks.

Tom Adams
Manhattan, KS USA


--- On Tue, 2/8/11, Howard Darr wrote:


From: Howard Darr <hdarr@embarqmail.com> Subject: RE: [CR] What size Velo Orange BB for classic Stronglight cranks? To: "'Thomas Adams'" <thomasthomasa@yahoo.com>, classicrendezvous@bikelist.org Date: Tuesday, February 8, 2011, 9:55 AM

I would be interested in this thread's conclusion would you please post if answer comes off list?

Howard Darr Kinsman OH USA -----Original Message----- From: classicrendezvous-bounces+hdarr=embarqmail.com@bikelist.org [mailto:classicrendezvous-bounces+hdarr=embarqmail.com@bikelist.org] On Behalf Of Thomas Adams Sent: Tuesday, February 08, 2011 9:40 AM To: classicrendezvous@bikelist.org Subject: [CR] What size Velo Orange BB for classic Stronglight cranks?

Dear List:

Looking for a user BB for my french Follis and a Stronglight 93 cranks.  Velo Orange is an obvious source for a French thread sealed BB unit.  However does anyone know for sure what size spindle to use?  Classic Stronglights used a 118mm spindle for a double, but I recall it had a 4-5mm offset to the right.  So would a VO 118 be too close on the right side?  I'm guessing I need to buy a 121mm and maybe use a spacer, but I'm hoping someone knows for sure.  Rear spacing is 120mm, chainstays are very straight without flare.  Chainrings 52x40.  Couldn't find anything in the archives.  Thanks in advance.

Tom Adams (measure twice, buy once)
Manhattan, KS USA