Re: {Classic Rendezvous} Re: Campag HF Hubs vs. Spoke X-ings ?

(Example: Framebuilders:Dario Pegoretti)

From: "John" <jtperry330@me.com>
To: classic-rendezvous-lightweight-vintage-bicycles@googlegroups.com
In-reply-to: <5a18dcb5-60e1-46fb-a606-fb65cf47ced9@18g2000prd.googlegroups.com>
Subject: Re: {Classic Rendezvous} Re: Campag HF Hubs vs. Spoke X-ings ?
Date: Wed, 23 Feb 2011 21:26:35 +0100
References: <8db0ebe9-aa21-4622-b0cb-a35c92efc294@n11g2000vbm.googlegroups.com>
Mailing-list: list classic-rendezvous-lightweight-vintage-bicycles@googlegroups.com; contact classic-rendezvous-lightweight-vintage-bicycles+owners@googlegroups.com


> Sig.Peter Bridge wrote:
> "...80% plus likelihood there will be no issue. 20%
> likelihood you'll come out to the garage one morning and the
> flange..."

.....will have surrendered "out to the garage"....the garage..the GARAGE!!!!!

What's the address, I'll be right over with my sawsall and crowbar?

the garage.....jez!

:)

John T.Pergolizzi Torino, Italy where the garage I rent is in an old Fiat airplane engine factory! And it's very, very cold.

On Feb 23, 2011, at 7:14 PM, pbridge wrote:
> From my experience, and broken. Much higher likelihood of failure
> than that if the hubs are not NOS and if there is a previous build
> mark. I wouldn't do it.
>
> Yes, I had time trial wheels in the 70's that had radial bladed
> spokes. :-)
>
> Peter Bridge
> san diego ca usa
>
> On Feb 22, 10:23 pm, Richard Cielec <teaa...@gmail.com> wrote:
>> Ahoy !
>> Re: Campag High Flange hubs, NR/SR, Tipo, 1970's- End of Time Line
>> I am asking for reason of my definite ignorance of the physics and
>> stresses placed upon hub flanges.
>>
>> Are radial and 2X crossings compatible with these high flange hubs
>> 32H
>> and 36H ? Assumption is that hubs are in good condition, of course.
>> Application would be road riding, not racing. Clilncher and tubular
>> rims. Rider weight approx. 140 lbs.
>>
>> Thank you
>>
>> Richard Cielec
>> Chicago, Illinois; U.S.A.
>
> --
> You received this message because you are subscribed to the Google
> Groups "Classic Rendezvous lightweight vintage bicycles" group.
> To post to this group, send email to classic-rendezvous-lightweight-vintage-bicycles@googlegroups.com
> .
> To unsubscribe from this group, send email to classic-rendezvous-lightweight-vintage-bicycles+unsubscribe@googlegroups.com
> .
> For more options, visit this group at http://groups.google.com/group/classic-rendezvous-lightweight-vintage-bicycles?hl=en
> .
>

--
You received this message because you are subscribed to the Google Groups "Classic Rendezvous lightweight vintage bicycles" group.
To post to this group, send email to classic-rendezvous-lightweight-vintage-bicycles@googlegroups.com.
To unsubscribe from this group, send email to classic-rendezvous-lightweight-vintage-bicycles+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/classic-rendezvous-lightweight-vintage-bicycles?hl=en.