Re: [CR] chain catcher behind chainwheels...mystery?

(Example: Framebuilders:Jack Taylor)

References: <26E3FC048C55423ABB48C56B693375D0@UserPC> <02C9FF9A42C0459A9DEDE28D36F886B0@UserPC>
Date: Mon, 10 Jan 2011 12:30:12 -0800 (PST)
From: "Anthony Taylor" <ajft1942@yahoo.com>
To: kevin sayles <kevinsayles@tiscali.co.uk>, classicrendezvous@bikelist.org
In-Reply-To: <02C9FF9A42C0459A9DEDE28D36F886B0@UserPC>
Subject: Re: [CR] chain catcher behind chainwheels...mystery?


Kevin,

I have two NR crank sets, one with, and the other without the "pip" I was told that this was a requirement when the distance between the ring and the crank was increased to accommodate the CSPC lip on the NR front derailleur.

Tony Taylor Manchester, NH

________________________________ From: kevin sayles <kevinsayles@tiscali.co.uk> To: classicrendezvous@bikelist.org Sent: Mon, January 10, 2011 3:24:33 PM Subject: Re: [CR] chain catcher behind chainwheels...mystery?

Seems everyone is absorbed in the topic of 'spokes with a S on the head' to respond to my quirey regarding chain catchers on Campag outer chainwheels!.........or maybe I've got everybody stumped?

I know several of you have the older 151 bcd Campag chainsets..... looking resplendant on Bianchi's, Cinelli's and the like.........if you could just check your chainset to see if your's has the chain catching pip on the inside of the outer chainwheel........or have I got something unusual [there is always the possibility that someone went to the trouble of drilling, tapping and fitting such a pip.....but I think not] My other 151 bcd outer chainwheel on my Bianchi does not have the pip..........

Cheers Kevin Sayles Otley West Yorkshire UK

----- Original Message ----- From: "kevin sayles" <kevinsayles@tiscali.co.uk> To: <classicrendezvous@bikelist.org> Sent: Sunday, January 09, 2011 7:10 PM Subject: [CR] chain catcher behind chainwheels


> Campag specialists out there......
>
> I've just returned from a cycle jumble in Manchester ....bagging myself a
>couple of bargains......one of which is a 151 bcd 53 tooth chainwheel in good
>usable condition, but what is noticible is the little screw in pip [or whatever
>it's called] to prevent the chain falling down the inside of the crank!
>
> Now I always thought this was a later addition to the 144 bcd
>chainwheels.....as in the early 144 bcd chainwheels didn't have the pip?
>
> So the question is.....How come Campag introduced this feature on the 151 bcd
>chainset....only to drop it when they brought out the 144 bcd chainset.......but
>then reintroduced it a while later?
>
> It does seem to me Campag where a bit inconsistant with certain
>features.......for example with the Record and Cobalto brakes.......unless I'm
>mistaken it seems the Cobalto had steel brake pad holders, wheras the Super
>Record [ or some of them] had alloy pad holders, and alloy
>adjusters..............
>
> One final titbit.....recently there was some chat regarding the 'outside
>bearing rear Gran Sport hub' many remarked about the pitfalls of such a
>design.........I have such a hub, though have yet to ride the bike with it on,
>so can't report on it's function........you don't see that many...but today
>there was two for sale today at the jumble!
>
> Right, time to have another glass of Tuscany wine and fondle my new found
>Campag!
>
> Cheers
> Kevin Sayles
> Otley
> West Yorkshire UK