So was the original Masi 3v tubeset that was made by Mannesman.
Peter Koskinen -----Original Message----- From: Richard M. Sachs <richardsachs@juno.com> To: Hilary.Stone@Tesco.net <Hilary.Stone@Tesco.net> Cc: mbikealive@earthlink.net <mbikealive@earthlink.net>; Classicrendezvous@bikelist.org <Classicrendezvous@bikelist.org> Date: Tuesday, October 17, 2000 8:01 AM Subject: Re: [Classicrendezvous] Mexico vs Super (was: Colnago quality)
>
>
>On Tue, 17 Oct 2000 09:39:01 +0100 "Hilary Stone"
><Hilary.Stone@Tesco.net> writes:
>>Tange offered a tubing with 0.4mm butted section the Prestige SL set
>>at
>>the end of the 1980s and early Reynolds 753 was also this thin.
>>Regards
>>Hilary Stone
>
>these tubes cited here were thin wall and re-composed.
>heat treated, higher strength...
>the record and even the kl sets were simply the same
>'ol 4130 stuff that colombo used throughout the line.
>only in thinner wall thicknesses.
>e-RICHIE