Re: [CR]WTB: raleigh logo'd cotter pin nuts

(Example: Humor)

Date: Sun, 17 Dec 2006 19:36:58 -0800
From: "Kurt Sperry" <haxixe@gmail.com>
To: "Tom Harriman" <transition202@hotmail.com>
Subject: Re: [CR]WTB: raleigh logo'd cotter pin nuts
In-Reply-To: <BAY114-F2706EB638A778CC9C62C2EF0C90@phx.gbl>
References:
cc: Classicrendezvous@bikelist.org
cc: Classicrendezvous@bikelist.org

I'll bet good user cranks and bottom brackets for that bike are out there for anyone that cares to look. Theose parts were turned out in quantity for years hardly changing to my eye at least.

The R nuts might be a little harder now to source as those were essentially consumables.

Kurt Sperry Bellingham WA USA

On 12/17/06, Tom Harriman <transition202@hotmail.com> wrote:
>
> Dear Tarik. Hello, the last time I saw anything like this was in the late
> eighties, and cotter pins were getting hard to find then. At some point
> the
> bottom bracket and axel will become pitted, have have to be replaced, and
> these have also disappeared many years ago. As much as you want to make
> this bike a period peace, at some point you will have to replace the
> cranks
> and BB with new stuff. Good luck with the rest of the project.
>
> Tom Harriman
> San Francisco, Ca.
>
>
> >From: tarik saleh <tsaleh@rocketmail.com>
> >Reply-To: tsaleh@rocketmail.com
> >To: Classicrendezvous@bikelist.org
> >Subject: [CR]WTB: raleigh logo'd cotter pin nuts
> >Date: Thu, 14 Dec 2006 09:00:22 -0800 (PST)
> >
> >CR'rs,
> >
> >i have a beat raleigh sports 1966 flavor that I got at
> >a garage sale in bits and pieces. I think it was
> >midway through an overhaul by a non bikey scientist
> >who thought a bike could not be that hard and then
> >bailed. I am in the midst of turning it into some sort
> >of coasterbraked townie venturing into the OT
> >landscape.
> >
> >Bike carcas here with tale of the weird half overhaul:
> >http://tsaleh.blogspot.com/2006/10/garagesus-brings-me-bike.html
> >
> >Anyhoo, one of the missing items were the nuts on the
> >cotters...I would love, for some reason to get some
> >little raleigh "R" logoed nuts for the cotter pins,
> >let me know if anyof you have any. Or know of a
> >source. I will not be upset if I must use unlabled
> >nuts, so let me know if you have those too... also
> >would buy entire cotter and nut assembly etc.
> >etc.etc..
> >
> >Tarik
> >
> >
> >
> >Tarik Saleh
> >PO Box 208, Los Alamos, NM 87544
> >tsaleh at rocketmail dot com
> >Bicycles, bicycles, bicycles: http://tariksaleh.com
> >All sorts of bikes blog: http://tsaleh.blogspot.com
> >
> >
> >
>
> >____________________________________________________________________________________
> >Do you Yahoo!?
> >Everyone is raving about the all-new Yahoo! Mail beta.
> >http://new.mail.yahoo.com