Re: [Classicrendezvous] Restoring Anodization; Was:polishing NR/SR parts


From: RALEIGH531@aol.com
Date: Thu, 16 Nov 2000 16:41:05 EST
Subject: Re: [Classicrendezvous] Restoring Anodization; Was:polishing NR/SR parts
To: swampmtn@siscom.net, classicrendezvous@bikelist.org


In a message dated 11/16/00 6:41:38 AM Eastern Standard Time, swampmtn@siscom.net writes:
> How do you replicate that lathe-turned finish on a scratched post without
> turning a 27.2 into a 27.1?
>

I only polish above the limit line, that is, the exposed portion of the seatpost, usually pretty near the line in my case. It doesn't matter if it's a little smaller than original diameter. If it's a decent post I just go for the mirror finish, haven't tried to duplicate the machine marks. I just clean the lower part, it's going to get greased up anyway.

Pete Geurds
Douglassville, Pa