Not aware C-Record used anything different, but the lower line Campy Victory? & Triomphe cranks sold in the C-Record era used a smaller circle, 116mm I think. Those are becoming a bit hard to find.
Regards,
Jerry Moos
Houston, TX
>
>
> Did C-Record ever use a BCD other than the modern 135 mm?
>
>
> > From: "BL" <xxxxxxx@xxx.net>
> > Reply-To: "Brian Lafferty" <javaeye@coppiearthlink.net>
> > Date: Sun, 27 Jan 2002 20:00:18 -0800
> > To: "Steven L. Sheffield" <stevens@veloworks.com>
> > Subject: Re: Campy C-Record BB Question
> >
> > Thanks for the info. The bolt circle is not compatable with today's
> > Record. For a couple of years Campy deviated.
> >
> >
> > ----- Original Message -----
> > From: "Steven L. Sheffield" <stevens@veloworks.com>
> > To: <xxxxxxx@xxx.net>
> > Sent: Sunday, January 27, 2002 3:29 PM
> > Subject: Re: Campy C-Record BB Question
> >
> >
> >>
> >> In article <em%48.21137$ag5.2042660@newsread2.prod.itd.earthlink.net>,
> >> "BL" <xxxxxxx@xxx.net> wrote:
> >>
> >>> I have a Campy C-Record crankset circa 1991 with the old disfunctional
> >>> bolt-circle. Can someone tell me if this crankset will work with a
> > current
> >>> 68x111 Campy Veloce/Mirage bb? Thanks in advance.
> >>
> >>
> >> Old, dysfunctional bolt-circle? Excuse me? C-Record cranks used a 135
> >> mm BCD, just like modern Campy cranks.
> >>
> >> In answer to your question, however ... yes ... the crank will work
with
> >> a 68x111 Campy Veloce BB ... it'll work with a 70x111 Campy Veloce BB
as
> >> well.
>
> --
>
> Steven L. Sheffield
> stevens at veloworks dot com
> veloworks at mac dot com
> aitch tee tea pea colon [for word] slash [four ward] slash double-you
> double-yew double-ewe dot veloworks dot com [four word] slash