[CR]Christmas Sale! NOS & nice used Campy (& other) Big & Small Parts

(Example: Framebuilders:Masi)

From: "Andrew Gillis" <apgmaa@earthlink.net>
To: "classicrendezvous" <classicrendezvous@bikelist.org>
Date: Fri, 16 Dec 2005 02:01:19 -0800
Subject: [CR]Christmas Sale! NOS & nice used Campy (& other) Big & Small Parts

Christmas Sale! NOS & nice used Campy (& other) Big & Small Parts

Dear CRs:

With the shorter daylight hours, I've had enough time to audit my vintage bike part supply. These extra parts, both big and small, will likely be very useful to you as either prime restoration or maintenance items.

The items are listed in alphabetical order, so please check thru the entire list, because there are some VERY nice items for sale.

JPegs are available, so please ask for them if you're unsure. Items are returnable within 10 days if unused. Round trip postage is at your expense.

Postage is extra at cost. Money Order and Personal Checks accepted, Paypal OK at 5% surcharge (I hate the fees!).

Thanks for looking, and Happy Holidays (Winter Solstice, Hanukkah, and Christmas)!

BRAKE CALIPER Spare Parts

Kool Stop brakepads for Campy NR/SR. NOS/NIB. Black, set of 4. (Looks like classic Campy, for a lot less. FYI, the newest sets are gray, ugh!) 2 sets are available at $18 each.

BRAKE LEVERS

Shimano Exage Aero brake levers, .NOS/NIB. Alloy levers, black bodies and hoods. Nice mid-grade set, with a longer reach, if you need to stretch out like I do. 2 pairs are available at $18/pair.

CABLES, DERAILLEUR.

Genuine Campy NR rear derailleur wires, 119 cm. NOS. <C> logo. 3 cables are available at $4.50 each.

CASINGS, DERAILLEUR

Campy RD chainstay casing, NOS later style with black plastic covering. Each piece includes the step-down and the sleeve ferrules. 5 available, $3 each.

CRANKSET

TA Tevano (Campy NR copy). 175 mm arms only, NOS, slightly imperfect, $75.

Also included is one set of stainless steel crank pedal washers. These arms are thicker and squarer than Campy. I'd estimate that this needs a 118 mm BB axle, but I don't know for sure. No chainring bolts or chainrings, but the still-in-production TA 144mm rings are the correct item for this crank. Fits all 144 mm chainrings, in any case.

FYI, genuine 15mm TA crank bolts and washers are available on eBay thru Baron Corpuz (banana brain).

Genuine TA crankpuller, 23 x 1 mm. NOS. Fits the preceding crank arms. $15.

CRANKSET SPARES

Campy NR Right arm, 175 mm. Used. Anodizing has been stripped for polishing. Will buff out to be a fairly decent but nothing spectacular spare part. One 1mm crack at the spider needs to be filed out as well (file both corners!). $15.

Campy NR Crank Bolts & Washers. NOS. 15mm black bolts with matching black washers. Two pairs available at $13/set.

DERAILLEURS, FRONT

Campy NR Front, late style 3-hole. NOS/NIB. Braze on or bolt on (your option) for $45. Braze on with NOS bolt on clamp body also included for $50.

NR Front, late style 3-hole. Clamp-on, good used condition. $15.

NR clamp pinch bolt & nut set, late style. (alloy nut, simpler bolt). Two sets available at $5/set.

DERAILLEURS, REAR

CampyNR Rear, 1981. Barely used, excellent, in the box, with instructions. Old style back plate but newer hollow rivets. Pulleys lightly worn, without any cracks. $65.

NOS Super Record cage plate set. Two sets available at $25 each. No Campy pulley bolts or nuts available, but I have some OK metric hardware (phillips head screws and matching nut) which are a good substitute. I'll include one pair with each cage plate pair.

DERAILLEUR SHIFT LEVERS

Campy DT shift levers, late style. NOS/NIB. One set available at $20.

FREEWHEELS

SRAM (Sachs) 7 speed 13-24, ISO, NOS/NIB. $50.

SRAM (Sachs) 7 speed 13-26, ISO, used, nice, $25.

SRAM (Sachs) freewheel cogs SY23, 7th position, NOS. 2 available, $5 each.

HANDLEBARS

Nitto B115, 42cm width at the brake lever clamps, and 45 cm width at the ends. NOS/NIB. This is a classic, no groove bar in silver. A longer horizontal reach of 10 cm, and a fairly modest 14 cm drop makes a bar well suited to taller riders who need a long reach bar. 25.4 mm diameter. $25

"Interloc" handlebar shims to convert a 25mm bar to a 26mm stem. One set available at $6.

HUBS

NR Front Hub Spares:

Campy NR front axle, silver. NOS, 2 available, $8 each.

Dustcaps, domed. Used but excellent. 1 pair available for $7.

NR REAR HUB: NOS 32 hole, low flange, 120mm, with 35 x 24 Italian threading. No QR, slight shopwear. 1 available, $45.

NR Rear Hub Spares:

Campy 140 mm rear axle. NOS. Black finish. 1 available at $24. If you buy the rear hub & axle together, I'll include the spacers and washers to configure the hub at the 140 mm specification. (FYI, a December 2005 eBay sale had three rear huballoy spacers sell for over $22!)

Dustcaps, domed. Used but excellent. 1 pair available for $7.

SEATPOST (THE HOLY GRAIL!) NOS, NIB!! NR seat post, 27.2mm x 180 mm. Beautiful!! The clamps and brackets are the older steel ones in pewter gray (cadmium plated?). There is a limit line marked on the bottom. 1 only available, $100.

Seatpost Spares:

NR steel top clamps (p/n 698 & 699), thick later style, slightly rusty. Not too bad, worth a cleaning and a replating as well. 1 set available, $5.

NR steel clamp bolts (p/n 703), with cylinder nuts (p/n 700), used. All parts have polished & rechomed, 1 bolt head is a bit too small for a standard 10 mm. (use an English-sized wrench instead?) 1 set available, $7

NR cylinder nuts (p/n 700). Used, rechromed. 1 pair available at $5.

SEATPOST BAG: New take-off Scicon 210 cc bag, #57, in royal blue. This small bag has a clever bracket which clamps onto the seat rails with a rotary knob. The bag itself disconnects from the bracket with a 90 degree twist. One available, $10.